Professional Flame Resistant Coveralls
Certified FR coveralls developed for high-hazard oil, gas and electrical work environments, with configurable fabric, fit, branding and packaging for B2B buyers.
When it comes to sourcing flame resistant coveralls, businesses face a fundamental choice: buy from a trading company that resells garments from unknown, unverified factories, or work directly with a manufacturer that controls every stage of production.
Heliotrope Safety is the latter. We own and operate our own production lines, meaning every FR coverall that reaches your workforce has passed through a process we control from start to finish — certified fabric sourcing and inspection, cutting, stitching, seam reinforcement, hardware fitting, final quality inspection, and pre-shipment verification.
This level of control is what allows us to guarantee consistent certified protection, batch-to-batch fabric integrity, and reliable construction on every single order, whether you're purchasing a sample run or a recurring bulk contract for a full workforce safety compliance program.
Protection in flame resistant coveralls is never a formality — a seam that fails under stress, fabric that loses its flame resistance after repeated industrial washing, or stitching that doesn't hold at high-wear points means the garment has failed the exact job it was bought to do: keeping a worker protected in a flash fire or arc flash event.
That's why our manufacturing process is backed by internationally recognised certifications, including ISO 9001 (quality management), ISO 14001 (environmental management), ISO 45001 (occupational health and safety), WRAP and BSCI (social and ethical compliance), and OEKO-TEX (fabric safety), alongside garment-level compliance to NFPA 2112 and ASTM F1506 for flash fire protection, with arc-rated (ATPV/Cal cm²) options tested and certified for electrical arc flash exposure.
Every FR coverall we produce goes through reinforced stitching, seam integrity testing, and quality inspection specific to certified protective garments, so the finished product holds up to the real demands of oil and gas, electrical utility, and industrial environments, not just a lab test on day one.
At Heliotrope Safety, full customisation sits at the core of how we work with buyers, without compromising certified protection. We manufacture flame resistant coveralls in your choice of certified FR fabric type and weight — cotton, cotton-nylon blend (88/12), or Nomex/modacrylic fiber, in standard, arc-rated, or insulated constructions — matched to your workforce's specific hazard exposure.
Colour options are available within certified FR fabric ranges, whether you need a single corporate colour or a consistent range across your product line. Sizing is available across a complete men's and women's range, including extended and tall sizing, with custom size grading available for workforces that need a tailored fit rather than a generic unisex cut.
On design, we work with buyers on pocket configuration, closure type, back yoke and sleeve pleating for mobility, and optional high-visibility FR reflective tape for roles requiring both flame protection and visibility compliance.
Branding customisation includes embroidered or printed company logos using FR-compliant application methods that preserve the garment's certified protection, woven or printed private label labels, custom care labels, and branded hang tags and packaging, with no reference to Heliotrope Safety anywhere on the finished product — so distributors and corporate brands can bring the coveralls to market as fully their own.
We also support insulated FR constructions for buyers operating in cold environments, and higher ATPV/Cal cm² arc ratings on request for buyers with elevated electrical hazard exposure.
As a full-service OEM, ODM, and private label manufacturer, we work with importers, corporate procurement teams, safety compliance officers, and industrial equipment distributors to develop flame resistant coveralls that match their exact specification and compliance requirements from the ground up.
Our production facilities are structured for high-volume B2B supply rather than one-off retail orders, with the capacity to support recurring national and multi-country distributor contracts, corporate safety program rollouts, and large workforce protective apparel programs.
International shipping is handled with export documentation, certification paperwork, and labelling prepared to match destination country requirements, and our team confirms lead times at the quotation stage so buyers can plan procurement with accuracy.
Choosing to work directly with Heliotrope Safety means price stability at volume, complete control over certified fabric, colour, size, and design decisions, and accountability over the protection a garment your workforce depends on in the moment it matters most.
Flame Resistant Coveralls | NFPA 2112 & ASTM F1506 Certified FR Coveralls for Men & Women | Bulk Manufacturer
Certified Flash Fire & Arc Flash Protection – Built from inherently flame-resistant fabric, meeting NFPA 2112 and ASTM F1506 standards for full-body protection against flash fires, sparks, and thermal hazards.
Arc-Rated Fabric Options – Available with specified ATPV/Cal cm² arc ratings for electrical work, providing certified protection against electric arc flash incidents.
One-Piece Full-Body Coverage – Single-piece coverall design minimizes loose fabric and gaps at the waist, reducing risk of exposed skin during flash fire or arc flash events.
Durable FR Fabric Construction – Constructed from cotton, cotton-nylon blend (88/12), or Nomex/modacrylic FR fabric, offering long-lasting flame resistance that doesn't wash out over the life of the garment.
Reinforced Stitching & Multiple Pockets – Reinforced seams and multiple tool and utility pockets provide secure storage without compromising FR protection or fit.
Available with High-Visibility Options – FR coveralls with reflective FR tape and fluorescent panels available for workers requiring both flame protection and visibility compliance.
Insulated & Standard Weight Options – Choose from lightweight FR coveralls for warm conditions or insulated FR coveralls for cold weather and winter job sites.
Comfortable, Mobility-Focused Fit – Elastic waist, deep-pleated back yoke, and sleeve pleats designed for freedom of movement during physically demanding tasks.
Available in Men's & Women's Sizing – Tailored fit options for both men's and women's workforces, including extended and tall sizing for full workforce coverage.
Ideal for Oil & Gas, Electrical, Utility & Industrial Work – Commonly used across oil and gas operations, electrical utility work, refineries, pipelines, manufacturing, and other flame-prone industrial environments.
Trusted Manufacturer for Bulk Orders – Direct manufacturing with certified quality control, suited for corporate safety programs, trade brands, and large-scale FR workwear procurement.
Our flame resistant coveralls provide certified full-body protection for workers exposed to flash fires, electric arc flash, and other thermal hazards. Whether you're outfitting an oil and gas operation, an electrical utility crew, a refinery or pipeline workforce, or an industrial manufacturing team, our FR coveralls deliver the certified protection required for high-risk environments without sacrificing comfort or mobility.
Constructed from inherently flame-resistant fabric — including cotton, cotton-nylon blend (88/12), or high-performance Nomex and modacrylic fibers — our coveralls meet NFPA 2112 and ASTM F1506 standards for flash fire protection, with arc-rated (ATPV/Cal cm²) options available for electrical work requiring certified arc flash protection. The one-piece design minimizes loose fabric and closes the gap at the waist that separate jacket-and-trouser combinations can leave exposed, reducing risk during a flash fire or arc event. Reinforced seams and multiple utility pockets provide secure tool storage without compromising the integrity of the FR fabric, and features like an elastic waist, pleated back yoke, and sleeve pleats allow full range of motion during physically demanding tasks.
Available in lightweight and insulated weights, our FR coveralls suit both warm-weather industrial sites and cold winter job conditions. Tailored across both men's and women's sizing, with extended and tall options available, ensuring workforces of all builds get coveralls that fit properly rather than a generic unisex cut. For roles requiring both flame protection and visibility compliance, high-visibility FR variants with reflective FR tape are available on request.
As a manufacturer of flame resistant coveralls, we offer full customisation, including:
Certified fabric type and weight (standard, arc-rated, or insulated)
Custom colours within certified FR fabric options
Embroidered or printed company logos (FR-compliant application methods)
Private label labelling and packaging
Bulk sizing runs across men's and women's ranges
Whether you're building out a corporate safety compliance program, outfitting an oil and gas or utility workforce, or sourcing certified protective coveralls for industrial and electrical trades, our FR coveralls are frequently ordered alongside our utility vests, winter workwear, and high-visibility safety vests, giving distributors and corporate buyers a complete protective workwear range under one supplier.
Order in bulk. Certify your compliance. Protect your team with coveralls built for the hazards of the job.
Q: What are flame resistant coveralls? A: Flame resistant coveralls are one-piece protective garments made from inherently flame-resistant fabric, designed to protect workers from flash fires, sparks, and thermal hazards. They meet NFPA 2112 and ASTM F1506 standards and are commonly used in oil and gas, electrical, and industrial environments.
Q: What's the difference between NFPA 2112 and ASTM F1506 certification? A: NFPA 2112 sets performance and certification requirements specifically for flash fire protective garments, while ASTM F1506 is the broader textile standard for flame-resistant and arc-rated clothing used in electrical work. Many FR coveralls are certified to both standards.
Q: What fabric are flame resistant coveralls made from? A: FR coveralls are typically made from cotton, cotton-nylon blends (such as 88/12), or high-performance Nomex and modacrylic fibers. These fabrics are inherently flame-resistant and maintain their protective properties over the life of the garment, unlike treated fabrics that can wash out.
Q: What is an arc rating on FR coveralls? A: An arc rating, expressed as ATPV or Cal/cm², measures the level of protection an FR garment provides against electric arc flash incidents. Higher arc ratings indicate greater protection and are required for workers exposed to higher electrical hazard levels.
Q: Can flame resistant coveralls be worn in cold weather? A: Yes, insulated FR coveralls are available for cold weather and winter job sites, combining certified flame resistance with added thermal insulation for workers in freezing outdoor or industrial conditions.
Q: Are flame resistant coveralls available with high-visibility features? A: Yes, FR coveralls can be manufactured with reflective FR tape and fluorescent panels, providing both certified flame protection and visibility compliance for workers in low-light or high-traffic environments.
Q: Who needs to wear flame resistant coveralls? A: Flame resistant coveralls are typically required for workers in oil and gas operations, electrical utility work, refineries, pipelines, welding, and other industrial roles with exposure to flash fire or arc flash hazards.
Q: Can flame resistant coveralls be customised with a company logo? A: Yes, but logos must be applied using FR-compliant methods that don't compromise the certified fabric's flame resistance. Reputable manufacturers offer embroidery or approved printing techniques designed specifically for certified protective garments.
Q: Are flame resistant coveralls available in men's and women's sizing? A: Yes, FR coveralls are typically manufactured in separate men's and women's fits, with extended and tall sizing available, and custom size grading for workforces that need a tailored fit rather than a generic unisex cut.
Q: How do I order custom-branded flame resistant coveralls in bulk? A: Contact the manufacturer directly with your fabric, certification, arc rating, sizing, and branding requirements. A full-service OEM/ODM manufacturer will confirm specifications, provide a quotation, and manage production and export documentation for bulk orders.
Product: Flame Resistant Coveralls (FR Coveralls)
Manufacturer: Heliotrope Safety
Manufacturing Model: Direct factory / OEM / ODM / Private Label
Fabric Options: Cotton, cotton-nylon blend (88/12), Nomex/modacrylic fiber
Certifications (Garment): NFPA 2112, ASTM F1506
Arc Rating: Available with specified ATPV / Cal cm² ratings for arc flash protection
Design: One-piece full-body coverage, reinforced seams, multiple utility pockets
Weight Options: Lightweight, standard, and insulated for cold weather
Hi-Vis Option: Available with reflective FR tape and fluorescent panels
Sizing: Men's and women's, extended and tall sizing, custom grading available
Manufacturer Certifications: ISO 9001, ISO 14001, ISO 45001, WRAP, BSCI, OEKO-TEX
Customisation: Fabric type, arc rating, colour (within certified FR range), insulation, pocket configuration, FR-compliant branding
Minimum Order: Bulk / wholesale (specify MOQ if available)
Typical Buyers: Oil and gas companies, electrical utilities, industrial manufacturers, safety equipment distributors, corporate safety compliance officers
Industries Served: Oil and gas, electrical utilities, refineries, pipelines, industrial manufacturing, welding
Get in touch
Address
Chowk, opp. Hilbro Factory Upper portion waves Co Store, Kotli Behram, Sialkot, Punjab 51310
Contacts
+1 5623527213
sales@heliotropesafety.com
Heliotrope Safety provides a one-stop solution for all types of safety wear and protective workwear products. With hundreds of customization options and very low minimum order quantities, Heliotrope Safety is the ideal choice for distributors, retailers, industrial suppliers, construction companies, and businesses seeking high-quality custom safety apparel and PPE solutions.
Address
582 Hope St, Mountain View, CA 94041, USA
Address
Plot 1, Mehran Town Sector 16 Korangi Industrial Area, Karachi, 74900, Pakistan